الشركة المصريه لتوريد الكيماويات و مشتقاتها  كيماسيد
Egyptian Co. For Supplying Chemicals & Derivatives
E C S C D

 
     
     
  Home  
  About Us  
  Our Mission  
  Products  
  Contact Us  
 

MATERIAL SAFETY DATA SHEET

WATER  BASE NO FOAM

It is a non silicon defoamer designed to provide maximum foam control in water base mud and Oil base mud which can be used as :

1- foam preventer when added to drilling mud .

2- foam Killer

This type of no foam is effective in all conditions and acts immediately

 

1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING

 

PRODUCT TRADE NAME    E.C.S.C.D NO FOAM 1

APPLICATION                       Foam Killer and preventer

SUPPLIER                       Egyptian Co. for Supplying Chemicals and Derivatives

Al Shareka El Alamia str. 68  2nd floor pyramids Area GizaEgypt

Tel: +2010 – 9457777 / +2010 – 1556002

+202-33885696+202-23646779

 

2 COMPOSITION / INFORMATION ON INGREDIENTS

 

 

 

 

 

Name:

 

 

 

 

1-     Water

2-     Aliphatic Fatty acid Esters

3-     Acrylic Acid Polymer

*

 

3 HAZARDS IDENTIFICATION

Flammable. Irritating to skin. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

 

4 FIRST-AID MEASURES

INHALATION

Remove victim immediately from source of exposure. Provide rest, warmth and fresh air. Get medical attention if any

discomfort continues.  If respiratory problems, artificial respiration / oxygen.

INGESTION

Drink a few glasses of water or milk. Do not induce vomiting. If vomiting occurs, the head should be kept low so that

stomach vomit doesn't enter the lungs. Get medical attention immediately!

SKIN CONTACT

Wash immediately with soap and water. Get medical attention promptly if symptoms occur after washing.

EYE CONTACT

Pormptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 1 5 minutes. Get medical

attention promptly if symptoms occur after washing.

 

5 FIRE-FIGHTING MEASURES

EXTINGUISHING MEDIA

Fire can be extinguished using: Water spray, fog or mist. Alcohol resistant foam. Dry chemicals, sand, dolomite etc.

SPECIAL FIRE FIGHTING PROCEDURES

Use supplied air respirator if product is involved in a fire. Cool containers exposed to flames with water until well after the fire is out.

 

6 ACCIDENTAL RELEASE MEASURES

PERSONAL PRECAUTIONS

- Wear protective clothing

ENVIRONMENTAL PRECAUTIONS

Do not discharge into drains, water courses or onto the ground. Contain spillages with sand, earth or any suitable

adsorbent material.

 

SPILL CLEAN UP METHODS

Extinguish all ignition sources. Avoid sparks, flames, heat and smoking. Ventilate. Absorb in vermiculite, dry sand or earth and place into containers.

 

 

 

 

 

7 HANDLING AND STORAGE

USAGE PRECAUTIONS

Keep away from heat, sparks and open flame. Ventilate well, avoid breathing vapours. Use approved respirator if air

contamination is above accepted level.

STORAGE PRECAUTIONS

The drums should be stored, with their seals intact, in conditions that avoid extremes of temperatures. Under these

conditions the shelf life of the product should be approximately two years.

 STORAGE CLASS

Flammable liquid storage. Environmentally hazardous storage.

 

8 EXPOSURE CONTROLS/PERSONAL PROTECTION

INGREDIENT COMMENTS

No exposure limits noted for ingredient(s).

PROCESS CONDITIONS

Use engineering controls to reduce air contamination to permissible exposure level.

 ENGINEERING MEASURES

 Explosion-proof general and local exhaust ventilation.

 RESPIRATORY EQUIPMENT

No specific recommendation made, but respiratory protection may still be required under exceptional circumstances when excessive air contamination exists.

 HAND PROTECTION

Use protective gloves made of:  Neoprene,  polyethylene or PVC.

 EYE PROTECTION

Wear approved chemical safety goggles where eye exposure is reasonably probable.

 OTHER PROTECTION

Wear appropriate clothing to prevent repeated or prolonged skin contact .

 MEASURES

Wash at the end of each work shift and before eating, smoking and using the toilet. Wash promptly with soap & water if skin becomes contaminated. Promptly remove any clothing that becomes contaminated.

 

9 PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE Liquid

COLOUR     Pale Violet to Pale blue Emulsion

ODOUR  No Odour.

SOLUBILITY Immiscible with water Soluble in Aromatic solvents

MELTING POINT (°C) < -30

RELATIVE DENSITY 1.05 @ 16°C

VISCOSITY Approx. 13 cst @ 38°C

FLASH POINT (°C) Min. 40 PM Closed cup.

 

10 STABILITY AND REACTIVITY

STABILITY

No particular stability concerns.

CONDITIONS TO AVOID

Avoid contact with strong oxidisers. Avoid heat, flames and other sources of ignition.

HAZARDOUS POLYMERISATION

Will not polymerise.

MATERIALS TO AVOID

Strong oxidising substances.

 

11 TOXICOLOGICAL INFORMATION

INHALATION

In high concentrations, vapours are narcotic and may cause headache, fatigue, dizziness and nausea.

INGESTION

Irritating. May cause nausea, stomach pain and vomiting. Pneumonia may be the result if vomited material containing

solvents reaches the lungs.

SKIN CONTACT

Irritating to skin. Repeated exposure may cause skin dryness or cracking.

EYE CONTACT

Irritating and may cause redness and pain.

12 ECOLOGICAL INFORMATION

ECOTOXICITY

The product contains a substance which is toxic to aquatic organisms and which may cause long term adverse effects in the aquatic environment.

 

13 DISPOSAL CONSIDERATIONS

DISPOSAL METHODS

Absorb in vermiculite or dry sand, dispose in licensed special waste. Dispose of waste and residues in accordance with local authority requirements.

14- Packing :

55 gallonsIron drums

55 gallonsplastic drums

5 gallonsplastic containers

 
     
   
     
 

تصميم موقع . كم